When you decide to paint your Cincinnati home’s interior, it can be a daunting task. You need to choose the right paint color and finish, then prepare the walls for painting and finally get the job done. You also have to deal with any imperfections in the wall surface, such as nail holes and cracks.
Painting is one of those jobs that’s easy when you know how to do it right — and difficult if you don’t. Here are some tips that will help make your painting project go smoothly:
Prepare The Surface
Before painting, make sure that all surfaces are clean and dry. Remove all dirt or grease with mild detergent or soap and water. Dry thoroughly with a clean towel before continuing.
Remove wall coverings that can’t be saved by using a razor knife or scraper (after making sure there’s no electrical current running through them). If there are any unsightly stains on the wall, such as from smoke or from pets, these should be removed before applying primer because they may show through after painting. Use an oil-based stain remover if necessary; then wash down again with soap and water before priming or painting over them.
Primer coats can also prevent bleed-through from darker colors onto lighter ones , so they may be necessary even if you’re painting over a base coat that’s already been applied. You should always prime bare wood before painting it, especially if the wood hasn’t been prepared with an oil-based primer.
If you’re painting over a base coat that’s already been applied, make sure that it doesn’t contain any water-based products. These could cause the new paint to peel away from the wall when it dries.
Time To Paint
When the preparations are complete, it’s time to paint. Make sure that you follow the manufacturer’s instructions for application, as some paints are intended for use with brushes while others are best applied with a roller. It’s also important to make sure that your brush or roller is clean before applying paint—if there’s old paint on them, they could transfer it onto your new coat. The best way to apply paint is in thin layers, allowing each one to dry before adding another.
The paint should be allowed to dry for at least 24 hours before you begin cleaning up. If you need to repaint an area, wait at least 24 hours after the first coat has dried before applying more paint.
If you’re painting an entire room, it’s a good idea to start with the ceiling. This way, if you need to touch up any areas on the walls or trim later, those spots will be easier to reach. If there are any holes in your walls or other defects that need repair before painting them, this is also a good time to do so.
Let The Professional Cincinnati Painters Do The Job For You
It takes a lot of time, effort and skill to paint a room and even more to paint several rooms. If you’re not sure how best to tackle the task, leave it up to the professional Cincinnati painters at Ohio Signature Painting. They are one of the best and most reliable interior painters Cincinnati has to offer. With years of experience under their belt, they know what needs to be done so your walls look their best.